Technal ST11 Commercial Door

Technal Sapa Stormframe STII Commercial Door

High Traffic aluminium commercial door provides the ideal solution for a wide range of commercial applications.

Technal Sapa Stormframe STII single and double doors have successfully completed an extensive testing regime for PAS24 security covering standard locking options, panic devices and electromagnetic locks. Stormframe STII is the ideal choice for any project.

2010 Equality Act Compliant

Available with specialist door closers adjustable for strengths EN1 to EN4 allowing for fine adjustment on site and removing the need to stock multiple closers. The closer meets all the requirements of document M and BS8300. Also available with compliant low threshold and pull handle options.

Thermal Performance

The Stormframe STII Door offers high levels of thermal insulation achieving a U value of 1.8W/m2k for doors without midrails and 1.9W/m2k for doors with midrails depending on size and glazing specification. This low U value can help building designers to achieve their Target Emissions Rate (TER) by being offset against the allowable U value of 3.5 W/m2K for high traffic doors when calculating the Building Emissions Rate (BER).

Weather Performance

Capable of BS6375-1:2015 watertightness levels: Centre Pivot AFT single door – Class 3A (100 Pa) Hinged Rebated single door – Class 5A (200Pa)

Single Door:
Sash size max: Centre Pivot 1100mm (W) x 3000mm (H) or Rebated 1300mm (W) x 3000mm (H)

Sash size min: Centre Pivot 400mm (W) x 1950mm (H) or Rebated 300mm (W) x 1950mm (H) Maximum weight: 100Kg for centre pivot, 140Kg for hinged rebated doors

Double Door:
Sash size max:

Centre Pivot 1100mm (W) x 3000mm (H) or Rebated 1300mm (W) x 3000mm (H) Sash size min: Centre Pivot 400mm (W) x 1950mm (H) or Rebated 300mm (W) x 1950mm (H)

Maximum weight: 100Kg for centre pivot, 140Kg for hinged rebated doors

Door leaves: Glazing beads and gaskets can accommodate insulating glass units and/or panels of 28mm – 46mm nominal thickness Pocket framing: Pocket Framing – Gaskets can accommodate insulating glass units and/or panels of 32mm nominal thickness Fixed lights: 5m2

PAS24 and Secured by Design Accredited
2010 Equality Act Compliant
Range of Accessories

Sleek, square-cut profile
Hardware is designed to fit easily within door frame and profile
Available with Dual-colour

  • High Traffic Door for Commercial Applications
  • Hardware options are specifically designed to fit easily within frame and door profiles including:
  • Multi-point lock with lever/lever handles
  • Electromagnetic locks
  • Panic exit devices
  • Single point locks
  • Electric strikes
  • Flexible position fixing plate, within the stile, profile securely fixes hardware
  • Dedicated profile pocket filler maintains a quality finish to door edges
  • Door stile end mouldings provide improved finish and allow a continuous seal across the bottom of the door
  • Utilising existing frame profiles reduces tooling investment
  • Extensive range of functional options including anti finger trap safety stile
  • Can be suited with Dualframe Si system and Elegance 52 curtain walling
  • Available with Dual Colour option
  • Door leaf glazing options up to 46mm
  • Door size up to 3.0m high
  • Door weights up to 100Kg for centre pivot, 140Kg for hinged rebated doors

Water Tightness: 100 Pa / Class 3A
Air Permeability: 300 Pa / Class 2
Wind Resistance: 1200

Ironmongery Options

Panic Escape Bar

Axim PR-7085 Concealed Rod Panic Exit Device Silver

 

Tested to EN1125

Technical information:

  • Heavy duty lever springs for durable operation of lever arms.
  • Internal mechanism manufactured from stainless and plated steel.
  • 8.5mm diameter steel operating rods.
  • 16mm bolt throw. Bolt length adjustable ensuring correct alignment.
  • Standard model suitable for doors.
  • 2135mm high x 1155mm wide.
  • 300mm & 600mm coupling rods available for tall doors and 1220mm long crossbars for extra wide doors.
  • Crossbars can be cut to suit exact width requirements.
  • Available with standard mortice rim cylinder and mounting pad allowing operation from outside.
  • Permanent latch retention by either cylinder key from outside, or concealed pins under levers.
  • Anodised crossbars in: silver Satin, dark bronze and black.
  • Housings and lever arms stoved, abrasive resistant finish to match
  • anodised finishes.

Locking Handle

Technical information:

  • Key Controlled
  • Outside Trim
  • For use with Axim PR7085, PR7085P & PR7100 Exit Devices.
  • Uses Axim screw in Mortice Cylinder with MS type CAM.

 

 

 

PR7085-Concealed-Rod-Technical-Information-100817

PR7085-Locking-Handle-Assembly-Instructions

Assa Abloy Narrow-style Anti-Panic Lock

Assa Abloy  Narrow-style Anti-Panic Lock

A narrow-profile anti-panic lock, the 9670 is suitable for entrance or internal doors and is designed to take a euro-profile cylinder.

Key Facts

  • Key action on latch bolt.
  • Single throw dead loft.
  • Easy reversible latchbolt.
  • Backset 30, 35, 40 and 45 mm.
  • Distance 92 mm.
  • With one-piece follower
  • Two-piece follower (= handed).
  • Forend stainless steel.
  • Latch and dead bolt die-cast bright nickel-plated.
  • Locks having 9 mm follower are fire-resistant, MPA certified.
  • Without strike plate.

Concealed Door Closer

TC8800 Concealed Transom Closer

The Axim TC8800 Series – Axim concealed closer is a hidden closing solution held integrally in the door leaf  and transom. This means that the door requires no external hardware creating an aesthetically pleasing solution. The correct closing solution is dependent on the door and configuration. To this end, Axim has three power sizes and “no hold” or “hold open” control options in
each concealed Transom Closer.

  • Suitable for single and double action doors
  • Extended spindle models
  • 2 valves for closing and latching speed adjustment
  • Preset cushion back-check
  • No hold-open or mechanical hold-open options
  • 3 strengths available: light, medium or heavy duty for door widths up to 1150mm wide and 100 Kgs in weight
  • Standard & Anti finger trap package options are available
  • Dummy unit available

TC8800-Transom-Closer-100817

Hook Lock

Hook Lock

The Axim LK1800 mortice hook lock provides the market with a quality product. LK1800 has been designed for narrow stile hollow metal doors. Hook locks provide security deadlocking for a variety of Aluminium doors including swing and sliding applications. The LK1800 hook lock is a heavy duty dead lock to provide good security against the use of a tools which may try to part the door from the frame. The hook clasps the keep and the fixed brass bar under the hook is used to stop lifting the door and also acts as a guide for the lock to sit correctly.

  • Hook bolt is constructed in a 5 ply laminated construction, with the centre core case hardened, complete with hardened roll pin to resist hacksaw attack
  • Suitable for aluminium or steel door applications requiring double or single action, centre hung or offset
  • Axim locks are designed to accept europrofile cylinders and come with a natural satin silver anodized faceplate
  • Steel case and mechanism are zinc coated to resist corrosion

LK1800-Hook-Lock-Technical-Information-100817

Dead Latch

Adams Rite 4750 Series Deadlatch

The Adams Rite 4750 Deadlatch offers flexible traffic control and an excellent level of security similar to the 4710 Deadlatch. The 4750 provides the option of 17mm Europrofile cylinder or thumbturn operation and metric backsets.

Spec Sheet

Electric Strike

 Electric Strike

For single and double leaf aluminium doors

For remote access control of any narrow stile aluminium door equipped with Adams Rite deadlatch. Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without operating the latch itself.

 

Electric Strike

Euro Profile Thumbturn

Euro Profile Thumbturn Cylinder.

If you need a cylinder performing essential security, F5 is the right choice. F5 is the basic level cylinder for your access requirements.

  • Provided with 3 keys
  • Keyed alike and master keying available
  • 5 Pin Security
  • EN1303 Tested
  • Brass or Nickel Finish
  • Equal Split Sizes

Mechanical Coded Lock

Kaba Simplex 3001 Push Button Lock

Mechanical push button lock – eliminates problems and costs associated with issuing, controlling, and collecting keys and cards. Provides exterior access by combination. Fully mechanical lock eliminates the material and labour expense of battery replacements. Single access code – one easy to manage code for all users. Lock is easily programmed via keypad without removing lock from the door.

Lock case is non-handed but the required drive assembly is factory handed and is not field reversible.

Mechanical retraction of latch upon entry of correct sequence of code or by turning of key.

Protective clutch mechanism. Fast code change whilst unit fitted to door. Key by-pass function. Hold back facility via code & cylinder. . Code disable feature by key. Suits doors 35-57mm thick.

Outside Operation : Thumbturn on entry of code or key
Inside Operation : Thumbturn/lever handle or paddle handle – free exit
Number Of Codes : 1
Combinations : 1000+
Code Length : 1 to 5
Holdback : Yes (key)
Latch : Operates with Adams Rite 4710 mortice deadlatch

Specification:

  • Size (mm): 244H x 40W
  • Finish: Satin Chrome
  • Combination Entry, Key Override,
  • Passage, Lockout.
  • Weight: 2 Kg

Handles

Cranked Entrance Pull Handles SSS

  • Our pull handles are manufactured from grade 316 stainless steel.
  • Suitable for aluminium and glass entrance doors.
  • Sold as a pair c/w back to back fixings to suit all thicknesses of doors.

Cranked Pull handle sizes:

  • 300mm fixing centres x 25mm diameter
  • 300mm fixing centres x 32mm diameter
  • 425mm fixing centres x 32mm diameter
  • 600mm fixing centres x 32mm diameter

 

 

Aluminium Pad Handle Set

  • Perfect set choice for commercial aluminium doors

 

 

 

 

 

300 x 32mm Semi Circular Entrance Pull Handle SSS

  • Our pull handles are manufactured from grade 316 stainless steel
  • Suitable for aluminium and glass entrance doors
  • Sold as a pair c/w back to back fixings to suit all thicknesses of doors
  • Size: 300mm fixing centres x 32mm Diameter.

 

 

 

T bar cranked pull handle

Available 600mm or 900mm

Flush Bolt

Flushbolt

Used in at the top and bottom of a slave leaf double door.

Technical Information:

  • Maximum Security hardened steel bolt
  • Zinc plated with ant-rattle sleeve
  • 7mm zinc plated steel rod with 40mm thread length
  • Easily adapted for non standard door installation
  • Die cast zinc alloy body mechanism
  • Fixing holes tapped M5
  • Deep finger recess and large lever for easy operation
  • Corners 2.5mm radius for easy matching of cut out

Related Products

CROWN RANGE

With the SAPA TECHNAL Crown Casement, true flexibility is available to meet your product needs. Our design expertise, technical knowledge, and passion has developed this window system to provide you with a range of options and capabilities – including those that provide structural integrity. The Crown system was designed the way we would like them to look in our

DUALFRAME 75
The SAPA TECHNAL Dualframe system combines strength, safety, sustainability and beauty for new-builds or refurbishment projects, particularly in residential, educational or light commercial buildings.

DUALFRAME 75 Si
The SAPA TECHNAL Dualframe 75 Si window system has been designed to comply with the increasing complexity of meeting Secured by Design, Building Regulations, British Standards and other regulatory demands.

Stormframe II Commercial Door
The SAPA TECHNAL Stormframe STII High Traffic aluminium door provides the ideal solution for a wide range of commercial applications. Since launch, it has been recognised as an exceptional product in terms of performance and fabrication. This product integrates seamlessly with Elegance 52 Curtain Walling and the Dualframe Si Window System

MX 52

SAPA TECHNAL GEODE MX successfully combines the creative and visual demands of architects and the functional needs of contractors, developers, and occupiers. By simplifying the technical aspects, manufacturing, and the installation process ensuring high quality, convenience, and cost-efficiency.

202 Commercial Door

The 202 Commercial Door is a non-thermally broken aluminium framing system. This modular product can incorporate single or double doors and automated sliding doors having being designed for entrance screens and shopfronts.

Leave a Reply