Skip to main content

Aluminium Flush Vent Casement Windows

The Flush Window Suite gives you the options to help make the right choices for both you and your customer.

Building on the strengths of the existing Crown Window range, the new flush window offer is designed to address the key elements in any customer decision process and give you the best solution.

Windows with a consistent unbroken external appearance, have come to be known as ‘Flush’. Associated with clean lines, flush windows have always been popular and have now a contemporary resonance with the discerning
modern home owner.

The Flush Window suite brings the same clean lines in long lasting Aluminium. The Crown modular approach in engineering this window, is designed to deliver both aesthetic and performance options.

A significant investment in any home, the Crown Flush Suite gives greater flexibility in choosing the right windows and without compromise.

Traditional Flush Window

Slim Flush

Alternate Window Styles Avaliable

Top Hung Window

Side Hung Window

Tilt & Turn

Aluminium Windows FAQ’s

Why should I choose Aluminium Windows?

Aluminium windows boasts many benefits when compared to UPVC or timber. The powder coating finish is basically maintenance free. Aluminium windows are available in a vast amount of RAL colours and finishes.

Aluminium is much stronger than other materials, in turn reducing the framework size which holds the glass, boasting slimmer sightlines. With the additional strength, ventilation can be increased as the openers can span more than Upvc.

Can I have a different colour inside and out?

Yes! our aluminium windows can be manufactured in dual colour, the lead times do increase. So if this option is for you, please allow more time when ordering.

How much does an Aluminium Window cost?

Aluminium windows come in a variety of different styles and configurations, the costs vary depending on your requirements.

All aluminium replacement windows are bespoke to the property of which they are going.

Alimatic offer exceptional quality and value, we are sure you will be delighted with your new Aluminium Windows and will enjoy the many benefits that come with your choice. Please give us a call for a cost, it might surprise how reasonable it actually is. Call 01376 347789

We are more than happy to provide a free, no obligation quote.

Get in touch today – we would love to hear from you.

Contact us

Handles

Classic, contemporary or traditional ? The choice is yours. Combine your choice of Aluminium window frame with your choice of matching hardware .

The standard handle is available in 8 different finishes and the ironmongery monkey tail and tear drop ranges are available in chrome, gold, graphite and antique black. Please take a look at our brochure for more options.

Alimatic – Crown Flush Vent Casement Window Brochure

Multi point locking

Alimatics Aluminium casement windows come with multi point locking, that secures the locking side of the window sash, using shoot bolts which fire into a espag locking keep.

Colour Options

The most popular colour choices are White, Grey and Black. These colours are stocked and can be manufactured with shorter lead in times.

The Crown Flush window is available in over 300 premium colours for you to choose from.

From neutral tones to metallic finishes, you can opt for the same colour throughout, or choose different colours for the inside and outside of your Aluminium window and door frames to create the perfect, individual and stylish look.

Whatever your colour preference, you will enjoy the benefits of one of the most durable finishes available for windows and doors. The low maintenance of our window and door finish, means it will need only an occasional wipe down with soapy water to keep it looking as good as new.

Building Regulation

Building Regulations on Windows & Doors

Most of the time permitted development applies to windows and doors and no planning is required, However all window and door installations come under Building regulations.

Building Regulations – Since 1 April 2002 building regulations have applied to all replacement glazing. The regulations apply to thermal performance and other areas such as safety, air supply, means of escape and ventilation. An external window or door is a “controlled fitting” under the Building Regulations and as a result of this classification these Regulations set out certain standards to be met when such a window or door is replaced. You could use an installer registered with the relevant competent person scheme. A registered installer will be approved to carry out the work to comply with building regulations without involving local authority building control. When work is complete you will receive a certificate showing the work was done by a registered installer.

Thermal Heat Loss – Dwellings are required to be energy efficient. A method of achieving greater energy efficiency is to take steps to reduce the amount of heat that is lost through the glazing in both windows and doors. If you are to install windows and doors you should be aware that they need to comply with the requirements of the Building Regulations in relation to the amount of heat that can pass through the glass and framework, which is measured as a U-Value. This U-value should not be exceeded.

Safety Glazing – Safety glazing should be provided to any glass in a critical area. Below is a list giving general view as to when safety glazing is required: Any glazed area within a window below 800mm from floor level, Any glazed area within a window that is 300mm or less from a door and up to 1500mm from floor level, Within any glazed door up to 1500mm from floor level.

Ventilation – Windows and doors provide ventilation to rooms within a dwelling and rules apply to how much ventilation. The type and extent of ventilation will be dependent on the use and size of the room. For example, rooms where steam will be produced (kitchens, bathrooms, utility rooms etc) should be provided with higher levels of ventilation (normally mechanical fans and windows) than other rooms where suitably sized window openings and background (“trickle”) ventilators may suffice.

Fire Safety – There are two aspects to be considered: Fire spread between properties through “unprotected areas”, and means of escape in case of fire. Unprotected areas – External doors and windows may need to have fire resistance and (in the case of doors) be self-closing or (in the case of windows) be fixed shut to limit the risk of fire spread between adjacent properties. The area of walls, doors and windows permitted to have reduced or undetermined fire resistance (known as “unprotected areas”) will be dependent on how close these elements are to the boundary. Means of escape – When replacing any window, the opening should be sized to provide at least the same potential for escape as the window it replaces.

Access To Buildings – When replacing main entrance doors in a dwelling unit that has been constructed since 1999, it is important to ensure that the threshold remains level otherwise the works will not comply with the Building Regulations as it would be making the threshold worse than it was when constructed. This is to enable people, including those with disabilities, to have continued access to the dwelling.

Aluminium Bi folding Doors

Read More

Aluminium Windows

Read More

Aluminium Sliding Doors

Read More

Front Entrance Door

Read More